1 thought on “How to knitted cats from bottom to top of the baby’s cardigan”
Benjamin
Hello: 1, the collar starts with 80 stitches, first weaves the collar, and starts to calculate the needle: {first minus 8 stitches on the basis of 80 stitches {is 4 tendons of rotten sleeves} There are 72 stitches left, and 72 stitches are removed by 3 pins, that is, 24 stitches each of the front and rear films, 12 stitches on the left and right of the front sheet, and 12 stitches on each sleeve. 2. After calculating it, let’s knit the collar nest first 1. First knit a needle pins {Left front film 12 stitches and one needle and there are 11 stitches}, then add a needle and then two under the needle under the needle under the needle under the needle. Patthion {one tendon} plus one needle, then weave 12 stitches {on one side}, add a needle in two stitches, plenty of needle {second tendon} plus one needle. Weaving 24 stitches {posterior tablet}, plus one knitting two stitches {third tendon} plus one needle. Weaving 12 stitches {another sleeve}. Add one needle and two stitches to lower the needle {fourth tendon} and add another needle. 3, weaving a needle, {The right front film collar first woven a needle and 11 stitches} After weaving this needle, weaves the sweater back and woven the needle. Stir up a needle {Left front film still 10 stitches}. After weaving this needle, weave the sweater back, and continue to add a needle on both sides along the two stitches {tendon} on both sides .. The number of pins of the tendons is divided into the sleeve, and the collar is divided up. When the needle is knitted 1st, a needle is provoked {left in the left front film. The method can be added. Weaving 12 stitches {another sleeve}, 12 stitches on the left and right of the front film. The placket was finally woven. The knitting method of the sleeves can also pick up the 6 stitches of the connected body like the body. After weaving this needle, the sweater is reversed back to the knitting. Start with 80 stitches. First weaving a needle and lower needle {Left front sheet 12 stitches and one needle. There is 11 stitches left. Add one needle in two stitches. 5, I pick two stitches in one needle, add this small sweater to 120 stitches {rear tablet 60 stitches, first woven the collar’s side, pick the needle to pick 2 stitches at a time, and pick. After twice, the remaining 3 stitches are provoked at a time, and the length of the sleeve can be woven. After the weaving, start calculating the minute hand: 1, and the pins are all woven. 2, {The right front film collar first weaves a needle and there is 11 stitches} After weaving this needle, weave the sweater back and weave it. Two Points of the needle {one tendon} add another needle. When the front film is 30 needles}, the sleeves are split, so the placket is flat and beautiful, and the two sleeves are 12 needles each}. Weaving 24 stitches {posterior tablet}, plus one knitting two stitches {third tendon} plus one needle, weaving a needle, 72 stitches. 3, continue to add a needle on both sides of the two stitches {tendon} along the front of the front, and then pick up a needle {right front film still 10 stitches, all the length of the body, the length of the body, the length of the body, the length of the body, the length of the body, the length of the body, the length of the body, the length of the body. When there is 7 stitches left to the front film: {first minus 8 stitches on the basis of 80 stitches {4 tendons of rotor sleeves}, and then weave 12 stitches {on one side} 24 stitches, 30 stitches on the left, and then 60 stitches with 60 stitches and 60 stitches and 6 stitches to lift the right front film, which is 24 stitches on each and rear tablets. Add one needle and two stitches to lower the needle {fourth tendon} and add another needle. 4
Hello:
1, the collar starts with 80 stitches, first weaves the collar, and starts to calculate the needle: {first minus 8 stitches on the basis of 80 stitches {is 4 tendons of rotten sleeves} There are 72 stitches left, and 72 stitches are removed by 3 pins, that is, 24 stitches each of the front and rear films, 12 stitches on the left and right of the front sheet, and 12 stitches on each sleeve.
2. After calculating it, let’s knit the collar nest first 1. First knit a needle pins {Left front film 12 stitches and one needle and there are 11 stitches}, then add a needle and then two
under the needle under the needle under the needle under the needle. Patthion {one tendon} plus one needle, then weave 12 stitches {on one side}, add a needle in two stitches, plenty of needle {second tendon} plus one needle. Weaving 24 stitches {posterior tablet}, plus one knitting two stitches {third tendon} plus one needle. Weaving 12 stitches {another sleeve}. Add one needle and two stitches to lower the needle {fourth tendon} and add another needle.
3, weaving a needle, {The right front film collar first woven a needle and 11 stitches} After weaving this needle, weaves the sweater back and woven the needle. Stir up a needle {Left front film still 10 stitches}. After weaving this needle, weave the sweater back, and continue to add a needle on both sides along the two stitches {tendon} on both sides .. The number of pins of the tendons is divided into the sleeve, and the collar is divided up. When the needle is knitted 1st, a needle is provoked {left in the left front film. The method can be added. Weaving 12 stitches {another sleeve}, 12 stitches on the left and right of the front film. The placket was finally woven. The knitting method of the sleeves can also pick up the 6 stitches of the connected body like the body. After weaving this needle, the sweater is reversed back to the knitting. Start with 80 stitches. First weaving a needle and lower needle {Left front sheet 12 stitches and one needle. There is 11 stitches left. Add one needle in two stitches.
5, I pick two stitches in one needle, add this small sweater to 120 stitches {rear tablet 60 stitches, first woven the collar’s side, pick the needle to pick 2 stitches at a time, and pick. After twice, the remaining 3 stitches are provoked at a time, and the length of the sleeve can be woven. After the weaving, start calculating the minute hand:
1, and the pins are all woven.
2, {The right front film collar first weaves a needle and there is 11 stitches} After weaving this needle, weave the sweater back and weave it. Two
Points of the needle {one tendon} add another needle. When the front film is 30 needles}, the sleeves are split, so the placket is flat and beautiful, and the two sleeves are 12 needles each}. Weaving 24 stitches {posterior tablet}, plus one knitting two stitches {third tendon} plus one needle, weaving a needle, 72 stitches.
3, continue to add a needle on both sides of the two stitches {tendon} along the front of the front, and then pick up a needle {right front film still 10 stitches, all the length of the body, the length of the body, the length of the body, the length of the body, the length of the body, the length of the body, the length of the body, the length of the body. When there is 7 stitches left to the front film: {first minus 8 stitches on the basis of 80 stitches {4 tendons of rotor sleeves}, and then weave 12 stitches {on one side} 24 stitches, 30 stitches on the left, and then 60 stitches with 60 stitches and 60 stitches and 6 stitches to lift the right front film, which is 24 stitches on each and rear tablets. Add one needle and two stitches to lower the needle {fourth tendon} and add another needle.
4